FF / PROFIBUS PA I.S. Hardware Design (H1-IS)
Übersicht:
The PROFIBUS PA/Foundation Fieldbus I.S. Hardware Design includes the schematics and development documentation for a small size universal fieldbus interface. Together with an application specific analog front-end (e.g. for transducers) a complete fieldbus powered intrinsic safe product can be build. Powerful internal CPU and plenty of resources to integrate complex signal conditioning, PROFIBUS PA Profiles or LAS function for Foundation Fieldbus.
Technische Daten:
- Fieldbus Interface IEC 61158-2
- Current Consumption
- PROFIBUS PA < 11,4 mA
- Foundation Fieldbus < 13,6 mA
- Internal Fault Disconnect Equipment
- Galvanic Isolation 500V DC
- Operating Temperature: -40…+85 °C
- Designed according to ATEX 95 (IEC 60079-0, IEC 60079-11)
- Conform to the FISCO Model
- I.S. Specification: EEx ia IIC T4/T6 with
T4: TA = -40…80 °C
T6: TA = -40…50 °C
Ui - 24 V Ii
- 380 mA Pi
- 5,32 W
- Supply to customer HW: 3,3 V / 3,5 mA
- Renesas M16C62 Microcontroller
- 256kB Flash, 256kB RAM, 8kB EEPROM
- SPC4-2 Fieldbus Controller
- Synchron. / Asynchron. Serial Interface
- 16 I/O (3 Interrrupt)
- Connector 1,27mm Pitch PCB Pinheader
- Completely Encapsulated
- Size (LxWxH): 75 x 40 x 14 mm
- Lead free
Click to enlarge
Inklusive Dienstleistungen:
- Circuit Schematic, Bill Of Materials (BOM) for lead free design
- HW + I.S design document incl. calculations
- Test documents
- Discrete MESCO MAU
- 1 Evaluation board
Lieferumfang:
- Circuit Schematic, Bill Of Materials (BOM) for lead free design
- HW + I.S design document incl. calculations
- Test documents
- Discrete MESCO MAU
- 1 Evaluation board
Produkt Nr.:
42002
Downloads:
